Fracture Fixation and Implants

The end-threaded intramedullary positive profile screw ended self-tapping pin used for fixation of long bone fractures in canines can resist pin migration, pin breakage, and all loads acting on the bone.

This FEA supports that the high-grade injuries of the ACJ should be treated with CC fixation combined with ACJ repair because this technique provides excellent stability in both vertical and horizontal planes and reduces stress to the suture button.

Atlantooccipital overlapping and its effect on outcomes after ventral fixation in dogs with atlantoaxial instability.

Plate osteosynthesis should be performed for olecranon fracture repair if technically feasible

The SILIS instrument addresses limitations associated with MIO, including maintenance of reduction throughout surgery along with reliable and accurate sacral screw placement

The 1.5-mm Adaption plate should be used only when a 2.0-mm LC-DCP would not allow for a minimum of two screws in the distal segment

Locking T-plates may prevent complications reported following the use of conventional implant systems

The technique can be considered if the fracture is not severely comminuted, and if at least the canine and first molar tooth can be used for anchorage

The lateral approach improves angle accuracy, bone purchase, and distance between pins

The 2.0 mm cancellous screws advantageous in bone with thin cortices and the 2.0 mm cortical screws with cortices measuring at least 1 mm in thickness